. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 09-07-2013 #1
    Tomnewry's Avatar
    Lives in Newry, United Kingdom.
    Tomnewry
    Last Activity: 26-03-2020 Has been a member for 9-10 years. Has a total post count of 77.
    Hi guys i have been messing about with the cnc all day and have managed to get it to cut to scale ie: cutting a square 100mm when asked. Now to accomplish this i have the driver set at 2000 steps on the dip switch and i have it set at 240 steps in the motor tuning settings, it is cutting to scale but can you let me know if this sounds correct.
    Thanks in advance.
    Reply With Quote Reply With Quote
  2. 09-07-2013 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by Tomnewry View Post
    Hi guys i have been messing about with the cnc all day and have managed to get it to cut to scale ie: cutting a square 100mm when asked. Now to accomplish this i have the driver set at 2000 steps on the dip switch and i have it set at 240 steps in the motor tuning settings, it is cutting to scale but can you let me know if this sounds correct.
    Thanks in advance.
    Strange figure that.? This suggests 8.3mm pitch screw.? Do you have any gearing ratio on it.?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What has gone wrong????
    By Davek0974 in forum Plasma Table Machines
    Replies: 54
    Last Post: 05-09-2014, 12:25 AM
  2. Ok, so whats wrong?
    By Davek0974 in forum 3D Printing Machines
    Replies: 32
    Last Post: 27-03-2014, 12:19 PM
  3. When Home 3D Printing goes wrong lol :)
    By Fivetide in forum Machine Discussion
    Replies: 0
    Last Post: 18-08-2013, 04:03 PM
  4. 1605/1610 have they sent the wrong ones?
    By kingcreaky in forum Lead Screws, Nuts & Supports
    Replies: 4
    Last Post: 30-07-2013, 09:22 PM
  5. Stepper shaft size and pulley bore size problem
    By psiron in forum Linear & Rotary Motion
    Replies: 13
    Last Post: 15-06-2010, 04:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules