1rst build, time to do next step

[Gytis]

Nope don't mind at all, only show what I don't mind being plagiarized.!!

Come on JAZZ!, show your secret projects

Slot will probably need lifting (or lowering).? Reason being chances are you won't find a timing belt short enough to keep slot in middle and still fit motor in.

I left slot in the same position, just lifted ball screw up as you suggest, I think now there is enough space (in the model now fitted T5-20 tooth pulleys)

Would use BK/BF not FF/FK blocks mounted straight onto rear of front plate then you can get rid of those plates. Will also make assembly much easier.

I did it, now both sides BK fitted. It really makes difference in assembly, and less machining in the parts.

With rear covers Instead of 3 flats I'd consider having a nice Arc so single piece of plate bends and follows it's shape instead of 3 separate plates.

well, arch is nice but I followed the angle of side plate, that's why I made braces like this shape, 3 plates is just in the model, in real life it will be in 1 piece (I hope).


Thanks for the useful tips JAZZ !

__________________________________________________ __________________________________________________ ________________________________________


And finally, one question:

timing belts width 15mm or enough 10mm ?, pulleys T5 or different?

Thanks to all !