Thread: 1rst build, time to do next step
Threaded View
-
05-07-2013 #1
First of all I want to say hello to everyone and thank you for sharing with their experience and knowledge!
After a year or so reading on CNC forums I decided that I have more knowledge about it than before and I think I'm ready to go to the next step.
But first of all I would like to hear from more experienced members than I about my CNC design and hardware, any input or criticism are more than welcome guys.
So there is a components which I decided to use in my build:
Whole machine will be from aluminum, plates (10, 20 and 25 mm thick) and profile 45x90
Ball screw for the X - RM 2005-RM 2010 ???, with fixed + fixed ends
Y - RM1605-RM1610 ???, same as X fixed ends
Z - RM1605
Hiwin profile rails, X-25mm, Y and Z 20mm
Nema 23 motors 320 oz-in 2.8 mH 3.5A, all axis
48V 12.5A power supply
Gecko G540 4 Axis stepper driver
Water-cooled spindle motor 2.2kw with a VFD
oh yes, I forgot to say that is cutting area is about 1220x845 mm
So that is all for now, Thanks again to all and good luck to everyone !
Excuse me for my bad English
Gytis
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
Step drill bits (where to get) ?
By Gytis in forum Marketplace DiscussionReplies: 10Last Post: 07-08-2013, 12:04 AM -
NEW MEMBER: First time build
By PAULRO in forum New Member IntroductionsReplies: 3Last Post: 22-02-2013, 01:37 PM -
OK, time to heed the advice of people on here and change build material
By deannos in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 12-12-2011, 11:29 AM -
Step 4 router
By John S in forum Milling Machines, Builds & ConversionsReplies: 9Last Post: 11-08-2009, 04:16 PM -
Step clamp
By Lee Roberts in forum Programmers CornerReplies: 0Last Post: 14-10-2008, 02:39 AM
Bookmarks