1rst build, time to do next step

[Gytis]

Could tell you Irving but then I'd have to kill you all to protect my self. .

Fine for industrial machines using servo's with high feed rates 25m/min+ and heavy loads

This will be my second CNC with these feed rates

You need this bracket to have some adjustment to make alignment with Y axis ball-nut easy and doing this from front and thru a hole will be a pain so would be much easier if it bolted from the rear into tapped holes in the Z axis rear plate.

You mean like this (see pics) , just drill a bigger hole in the bracket for adjustment ?

Unfortunately finding these things out often comes from building the first machine and at worst case scraping a few parts learning on first build

I understand this and I'm ready for this (to scrap few parts, especially with my tools)!

Thank you guys