. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #12
    Quote Originally Posted by John S View Post
    OK Lee said this loads of times so this time I'll write slowly so you can read it.

    W E H A V E T H E S A M E I N F O A T T H E T O P O F T H E P A G E A S A T T H E S I D E R E S U L T I N G I N O N L Y 3 / 4 O F A P A G E S H O W I N G W H E N Y O U A R E P A S T T H E T O P S I D E B I T

    W H Y D O W E N E E D T H E S A M E I N F O T W I C E , T O P O N I T 'S O W N I S F I N E
    I've already explained why John in the other thread:
    Quote Originally Posted by Lee Roberts View Post
    Because eventually the TOPSTATS on the forum home page that myself, you and a few others i know of like is going on the new design, so rather than remove it, first i have replicated what we get from it on the side bar, the idea was it would give people time to find what is in the side bar and adjust to using it.

    The TOTSTATS is a 3rd party addon for vB and i dont want to support it anymore, it gives us nothing that isnt already here and the sidebar now has the same content, so its just extra queries and conflict for the new design for no reason.

    Other than being a little over the 50 word optimal line length for reading print, i cant see anything wrong ?

    .Me
    When I said in the quote above "is going on the new design" I should have said "is being removed", with regards to vegetables I also said:
    Quote Originally Posted by Lee Roberts View Post
    Sorry about that, I haven't had the time to build any custom modules for the side bar yet. Which would obviously extend the sidebar down the page more and add more feature to the overall page.
    This is still true, I’ve been though quite a rough time over the last 8 months going from 17st down to 14st mostly fat loss but I’ve also got some muscle loss in my arms, I’ve now been diagnosed with an underactive active thyroid this can affect people differently with some putting weight on and others losing weight, there is quite a few other symptoms that go with it as well but to sum up "The thyroid gland produces hormones which regulate the body’s metabolic rate as well as heart and digestive function, muscle control, brain development and bone maintenance."

    For me I’ve had major problems with my joints/bones (some would argue the brain as well lol), if I do any kind of physical work the next day I’m in allot of pain and have massive swelling/fluid on my joints, this is mainly on my wrists with it taking me 10 mins to get out of bed in the morning depending on me having a good day or not, some days even if I haven’t a good day the day before as soon as I put any weight on my skeleton it hurts.

    This is quite difficult for me mentally because I’m naturally a very active and physical person with lots of things that need doing, one day I could be doing a job laying 2x2 slabs/flags for someone, another day I may be fitting a new stair case, you get the picture - I’m very handy with my hands or have been :(. Most of the problem seems to be with my wrists to the point where it hurts to brush my teeth let alone open a can of beans for the kid’s dinner. I'm saying this here because one day someone may read this and notice my symptoms as being the same as theirs, for me this has been a long progression so allot of it while quite bad now has been going on for some time but because it’s been over a long time I’ve got used to living with it rather than noticing something is wrong.

    There are a couple of other ones that stand out more like depression and so on but I’m not going into that, though that one dose get me quite a bit, fed by things like not being able to allow my kids to jump on me and play because they can hurt me really easily. Anyway I’ve got another blood test next week to see if my thyroid has picked back up, I don’t think has because come 4pm I’m shafted and need to rest for a couple of hours while my dinner kicks in, I’m on 50mg at the moment and that has made me feel better in a few ways but like I say come 4 I’m no good to anyone and I’ve clearly still got a problem with my bones, I recon I need 150mg but who am I to say.

    It’s not all doom and gloom though, today I’m having quite a good day, I could get out of bed this morning and the only really problem today is my right knee, my wrists are still goosed but they always are so far, when it was just my right wrist it wasn’t to bad but now it’s both. Bummer!

    So yea with all this sun we've been having I’ve managed to catch up on a few jobs around my own house that need doing, this week has seen new accommodation for the hens being built, doing an hour or two in the evening.

    Hoping to get the last bit done later today (the top bit that’s missing), the framing is just roofing battens with the two top bits being hinged to allow for access. The rest is from some pallets I got off the local wood yard, at the bottom you can see the base is now finally finished for what will be my 24x12ft home workshop/shed (2 ton of type one, 5 ton of sand and 100+ slabs later), not much to show I know but it’s an achievement for me at the moment and I've been doing other smaller jobs as well when I can.

    The last school run is approaching so I need to wrap this up, in September my youngest starts school full time so I will have my days back to myself, I’m hoping after putting food on the table I can crack on with the work I have planned for the forum and the other sites, with a bit of luck they can give my wrists back (the rest I can live with) and so I will also be able to get the workshop built and then enjoy having my own cnc machine up and running (4ftx2ft cutting area) finally!

    Until then you will just have to be patient with me because as I’ve said above, life is a bit of a struggle at the moment for me and mostly I’m just getting by doing what I need to everyday to keep things going for the house and family.

    Sorry for going on for so long but I couldn’t see any other way of putting out there that would give you an idea, I’m not looking for sympathy I’m not that type of person, it’s also been nice to get it off my chest as well, so if you read all of this, thanks and sorry for the delay in going forward.

    .Me
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P1060363.jpg 
Views:	236 
Size:	642.5 KB 
ID:	9281   Click image for larger version. 

Name:	P1060364.jpg 
Views:	214 
Size:	616.4 KB 
ID:	9282  
    .Me

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. anyone built a h-bot style table for plasma?
    By nobby in forum Plasma Table Machines
    Replies: 0
    Last Post: 11-05-2014, 03:45 PM
  2. angular contact bearings - back to back, further apart
    By dsc in forum Linear & Rotary Motion
    Replies: 16
    Last Post: 05-01-2014, 10:59 PM
  3. eBay: X2 Style CNC Mill For Sale
    By davidimurray in forum Items On eBay UK
    Replies: 2
    Last Post: 04-10-2013, 10:26 PM
  4. Truss style Gantry
    By D.C. in forum Gantry/Router Machines & Building
    Replies: 28
    Last Post: 15-12-2012, 07:23 PM
  5. roller blind style covers
    By tumutbound in forum General Discussion
    Replies: 2
    Last Post: 26-06-2009, 11:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •