. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Lee, have you looked at Bing ads system instead of Google? It is your site and I respect that. When coming on the site I post past the front page with the thread stream and go straight to the forum home page which is basically the old front page plus side bar.

    The reason that I suggest Bing Ads over Google is due to a few issues. There is a large group of folks that are leaving google ads due many different issues with not only the ads but also Google's logarithm for site information. No Bing is not perfect and has issues as well just not as bad as Google at present.

    The blank side bar which I am looking at as I type this reply is lost space. Either a floating/scrolling ad space to use it better might be worth looking into. Yes I understand that web site design is very time intensive we run a few ourselves and keeping up with the law and information current and accurate is a PITA. My wife and I knew that it was going to be PITA and still swear at it daily when things go wrong. So good luck and I use the forum to help as able and when I need info I will ask. I will say that the older forum set up was easier to get to information and find out what folks where looking for and IF I could be of help.

    Michael
    Software SolidWorks 2024, Onshape, Aspire v9.5, Blender
    CNC Machine: http://www.mycncuk.com/threads/3661-...Second-machine
    3D printers both FDM/FFD and MSLA resin
    CSWA &CSWA-AM certified
    www.marino-customs.com

  2. #2
    Lee , really sorry to hear about the illness, I do, do sympathy, as deep down I can empathize with your problem. Plus I think I’m still human. However I have to agree in part to some of the suggestions. I still adhere to the KISS methodology, Keep It Sodding Simple, for Simple Sodding People. There’s an information overload and space wastage, in my opinion people want to land on the forum not some vastly over populated informational sink.

    Fiction is far more plausible when wrapped around a thread of truth

    Nothing great was ever achieved without enthusiasm.
    Ralph Waldo Emerson


  3. #3
    I again would have to agree, I am not super active on here but much much less so now the changes have been implemented.
    I will check back periodically to see when/if the original or better more useful forum is in place, but I will continue to have a reduced presence in the current state.

    Craig

  4. #4
    In an age where everyone is worn out with folks not listening to them (especially governments who always seem to go against the populist view once voted in!), it'd be a brave forum owner that doesn't listen to his membership!

    Now I realise that the ideals of owning & running a forum are not always in synchronicity with the ideals of the membership (few people actually run forums for love, but rather have an end goal - dosh), but without members, there is no forum, with no forum, there is no revenue... so I guess it's always going to be a case of push & see what you can get away with (just like taxes!), but clearly the recent changes are beginning to alienate folks.
    Last edited by HankMcSpank; 18-07-2013 at 11:53 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. anyone built a h-bot style table for plasma?
    By nobby in forum Plasma Table Machines
    Replies: 0
    Last Post: 11-05-2014, 03:45 PM
  2. angular contact bearings - back to back, further apart
    By dsc in forum Linear & Rotary Motion
    Replies: 16
    Last Post: 05-01-2014, 10:59 PM
  3. eBay: X2 Style CNC Mill For Sale
    By davidimurray in forum Items On eBay UK
    Replies: 2
    Last Post: 04-10-2013, 10:26 PM
  4. Truss style Gantry
    By D.C. in forum Gantry/Router Machines & Building
    Replies: 28
    Last Post: 15-12-2012, 07:23 PM
  5. roller blind style covers
    By tumutbound in forum General Discussion
    Replies: 2
    Last Post: 26-06-2009, 11:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •