Problem with Mach 3 converted lathe x axis Boxford TCL 160

[martin54]

If you have a look in the mach3 manual it explains it.
I had the same thing when I first started running the machine I had refurbished. Worked like that for a while & was fine. Since then I have changed the axis around so the Y axis is now the x axis & vice versa. If you swap your x & y around you will probably find it does the same thing

[FarrerDesign]

thank you for the help. I will try that when I get home from work this afternoon and I will let you know. if that has sorted the problem.

once I edit the configurations, will this be saved for the next time i will turn on my machine or will I have to reset it again?

[martin54]

Mach3 will save any changes you make.