Open Source Dust Shoe Designs

[EddyCurrent]

@routercnc, any update on your dust shoe build ?

Also I can't find a good source of the brush strips with decent length bristles, i.e. 50mm+
There are some places but postage doubles the price.

Edit: just found these

http://www.toolstation.com/shop/Iron.../sd2802/p84655 ( looks like the aluminium will pull off making it useable)
http://www.kronosrobotics.com/dust-shrouds/
http://www.instructables.com/id/CNC-...boot/?ALLSTEPS

[JAZZCNC]

Eddy look for industrial Garage door brush strips and you'll find them at 100mm +.

[EddyCurrent]

Eddy look for industrial Garage door brush strips and you'll find them at 100mm +.

Thanks, I think I tried that a while back and found they were quite expensive as you were also paying for the aluminium part that will probably be discarded, I read somewhere that just the brush can be bought on a roll that you just cut to length and it's flexible but might have been in USA

Edit: This was the best place I found a few weeks ago but postage on long lengths killed it, if local pick up it would be ideal.
http://www.formseal.co.uk/camstrips.html