Parts for hand ergometer (exercise bike)

[chopper12]

hi,
just noticed this thread, what material and quantities and timescale are you looking at?
might be able to make some of the bits in the evenings after work if that helps you out

[irving2008]

hi,
just noticed this thread, what material and quantities and timescale are you looking at?
might be able to make some of the bits in the evenings after work if that helps you out

For all the drawings posted, unless stated, the material is aluminium, some machineable grade such as 6061 but depends on what can be picked up on eBay/etc. As to quantity, 2 off each drawing (i.e 2 cranks, and 2 handle assemblies comprising 5 parts, handle/boss/axle/2xspacer). Timescale, well I need to get exercising, so ideally as soon as possible, maybe within 4 weeks?

[chopper12]

ok not a problem should be less then 3 weeks, got some 6082 bar ends at work that can use if 6082 is ok?
will need some extra dimensions on the boss as cannot open the .dxf files
hope this helps

[JAZZCNC]

Just seen this I can help if needed. . . . . just let me know. Got some stuff here if needed

PS: Can do them Wed if that helps.!