-
14-08-2013 #1
got these from a scrap machine, as they look quite professional though maybe i could use them on my upcoming build, i considered if i could connect the break out board correctly it should work (should is the magic word), after all it only needs a few wires connecting to get it going, i did like the fact it only needs 240v kettle lead to work , no need for power supplies although i did get a switchmode supply and a 4 way indexer which im sure i dont need, cheers Nik
-
14-08-2013 #2
btw machine was scrapped due being a spare and then technology left it behind
-
14-08-2013 #3
Looks like step and direction into 1 and 2 then 14 and 15 link together and go to ground on the BOB
No idea how you set amperage though ?John S -
-
14-08-2013 #4
any part numbers or other identifying marks?
-
14-08-2013 #5
-
14-08-2013 #6
The bottom 3 switches of the top bank are labelled 'motor curr'. Also 2 switches labelled 'resn' I'd guess are microstep setting?
More intriguing are the 'setup' trimmers for accel, etc.Last edited by irving2008; 14-08-2013 at 11:35 PM.
-
15-08-2013 #7
Hi John
We use this Parker equipment at work send me a pm with the model numbers I think we will have the manuals for them.
Andy
You can tell I hav'nt been on here for a long time!
Nick send me your details including model numbers I,m sure I can help.Last edited by audioandy; 15-08-2013 at 07:04 AM.
-
15-08-2013 #8
-
15-08-2013 #9
-
15-08-2013 #10
Manual here http://www.parkermotion.com/manuals/PD/PDS_E.pdf
2.5A min, 5A max driver in 350mA steps
step settings 400, 1000, 2000, 4000 (i.e. 1/2, 1/5, 1/10, 1/20)
opto-isolated inputs
regenerative dump circuit
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Cast aluminium gantry router
By jrcast in forum Gantry/Router Machines & BuildingReplies: 17Last Post: 17-02-2017, 08:13 PM -
Semi - Experienced / Experienced CNC Turner required in Rutland
By ChrisMunday in forum Opportunities Available & SoughtReplies: 0Last Post: 05-02-2014, 11:08 AM -
Epoxy cast plastic injection tools
By gavztheouch in forum Moulding MachinesReplies: 0Last Post: 27-01-2014, 11:33 PM -
RFQ: Marking a cast iron
By mike stat in forum Projects, Jobs & RequestsReplies: 1Last Post: 13-09-2012, 10:22 PM -
Can anyone recommend a spindle for milling PCB and cast acrylic?
By HankMcSpank in forum Spindles & Drive MotorsReplies: 10Last Post: 11-10-2011, 08:54 PM
Bookmarks