Wobblycogs CNC Mk2

[EddyCurrent]

"First Rotation", sounds like a maiden flight.

Looking great, 600x600 seems a good size as there's plenty of room in there. Perspex cover is a good idea, it's always best to aim for IP2X with a panel.
I also found stepper a bit noise upon first fire up, used Pro Tuner to set the current and now very quite indeed.
I don't know what the requirement are for that inverter but mine specified 75mm free space both top and bottom for cooling, must be installed upright, no requirement for free space at the sides.

[Clive S]

I don't know what the requirement are for that inverter but mine specified 75mm free space both top and bottom for cooling, must be installed upright, no requirement for free space at the sides.

Eddy Is that to stop the electric from falling out.

[EddyCurrent]

Eddy Is that to stop the electric from falling out.

No that's what insulation is for also when I first read it was an 'inverter' I mounted it upside down