JBEC router system UNDER THE BONNET

[JAZZCNC]

JAZZ - that okay? Not to much waffle I hope.

Yes absolutely spot on that Buddy.!! . . . .Thank you.!

in the hope that on day in the next decade we get the JAZZCNC seal of approval :)

Oh dear . . Oh dear . . .Oh dear what do I Say.?????? . . . . . . No Sorry can't give approval.!!

First let me say not going to pull it apart or condemn because the machine is very well thought out and professionally put together. far far removed from like of strike CNC and some other 'Merchant's' that are dicey.! . . . I congratulate on the professional way it's done and presented.

What bothers me is the the fact you have what is basicly just a supped up version of skate board bearings coupled with very flimsy gantry sides connected to flimsy ballnut brackets. Now for £5100 for machine and Electrics only, I would expect much more for my money with real profiled linear rails and substantial frame.

With this rail system and weak frame work I foresee that this machine will be very baggy within side 3yrs if worked 8hrs day and will require plenty of maintenance and setting up to keep accurate much after the newness has worn off.!!

Personally for best part of 6k investment with PC, spindle etc I'd want better than this machine provides. That said for Hobby use then it's rail system and IMO weak gantry are fine, It's just far too expensive.!!

Very nicely done thou and very professional and you seem a very straight guy so I wish you all the best with this machine.! . . . But for what it's worth I Honestly can't give 100% approval at this price. . . Sorry.