JBEC router system UNDER THE BONNET

[StoneyCNC]

Nice Video not sure of the point has it's mostly meaning less.? . . . It's a CNC machine not a sit on lawn mower.!!

Not a lawn mower...?

It demonstrates the tower stiffness and that there is no slop/deflection when my 90kg..slim fame puts pressure on the gantry and the slides. It also shows that when you move the load point around the bed does not twist up and deflect. Will look to get other data too.

EDIT: Ok years of tuning race engines has taught me that the ear is a highly tuned indicator showing when things are running nice and smooth.!! . . .

I've often heard that a wind turbine monitoring expert puts a piece of metal against a turbine structure and can tell what the bearing situation in the gearbox is. The human ear is quite the sensor

So with that I'd request a Video of all Axis disconnected from the ball screws being manually worked both fast and slow.!!

aye aye capitan!

to keep the threads cleaner and on topic I've put this here http://www.mycncuk.com/forums/manufa...n-control.html