. .

Thread: Fluffy mdf

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-08-2013 #18
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    With 6mm cutter at 6mm DOC 13,000RPM the minimum I'd be cutting at would be 4mtr/min and that's allowing for a weak machine. If your machine is strong-ish then you'll be wanting to be around 5-6Mtr/min and could go much higher if wanted 8-9mtr/min with 14-15K rpm.

    The VfD could be showing Hz but it may be 400.0Hz not 4000Hz and it's not showing the point. What make of VFD is it.?
    Last edited by JAZZCNC; 17-08-2013 at 09:44 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules