Small metal Lathes / IE 350 to 50W machines

[JAZZCNC]

You taking the Pi** M8

Nothing wrong with that question.??

DudZ for inside turning you need a Boring bar and for general outside or face turning then you just need standard tooling which comes in few forms.
Have a look on this page and you'll see sets cheap enough to get you going,Lathe Tools - Arc Euro Trade
When you get more into it you'll probably buy a few of the indexable tools. Look for indexable tooling and you'll see different forms and cutting angle's etc.

[dudz]

Great... Will do thx.

Just suming up wether it is more practicle to pay someone else to do the turning or set myself up. So gathering all the info I can.

[JAZZCNC]

Great... Will do thx.

Just suming up wether it is more practicle to pay someone else to do the turning or set myself up. So gathering all the info I can.

Can't answer that question but what I can tell you is that the lathe is the Most useful tool in my shop and I wouldn't be without one. . . .It's also SOOOO therapeutic and rewarding.!!!

[mekanik]

Nice one jazz, had a change of heart & went to the same spot as you.Lathe Tools - Arc Euro Trade

[Jonathan]

Look for indexable tooling and you'll see different forms and cutting angle's etc.

One thing worth mentioning about the indexable tooling is not to get one of those sets with lots of different tools for a seemingly good price. Apparently they'll be poor quality, so you're much better off buying just the ones you need individually. To start with you're probably much better off using HSS tool steel and grinding your own since it's really easy to do and saves a lot of money. It's only when you start cutting hard materials, or bigger quantities that you'll get fed up of regrinding the tool and want a carbide one.

[birchy]

Apparently they'll be poor quality, so you're much better off buying just the ones you need individually.

In addition to this, particularly if buying from eBay, make yourself familiar with what's in the the "machine tool sets". Some sellers start off with these but sell the contents individually to make more profit.