Threaded View
-
22-08-2013 #7
I see that these get more popular here than the geckos. I read some threads here on the forum. I will go with them
I had my eye on these as a substitute for the ones that i had to buy from abroad and pay duty. I will look deeper in the specs, but most probably will order them through Zappautomation.
No idea for this one. I should educate my self how to calculate this amperage and from where to get the transformer.
I was looking into this one. For sure i need a board with 2 LPT connections as i need more ports for communicating with the VFD, turning on mist and vaccum and
On my actual small machine i have trip signals from the VFD and power detection which are very handy in real life. And a second BOb af course. So that BOB wins. Actually its not so expensive for what it offers. I spend more money on my 2 boards.
Sorry, i dont understand you
1. 1610 for long axis that moves gantry and 1605 for the gantry / that moves Z/ and 1605 for the z, correct?
2. I buy belts from Belting online. Should i use the minimum sized belt pulley or go a bit bigger for the size of belt i mean? What is the typical size? I cant seem to find the sheet i used for calculating belts. I remember the AT was stronger but a kind of harder. Obviously either way it should be pitch 5, otherwise i have to go with bigger pulleys
-
The Following User Says Thank You to Boyan Silyavski For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
BUILD LOG: Steel frame cnc router design/build
By CraftyGeek in forum DIY Router Build LogsReplies: 110Last Post: 06-05-2015, 10:00 PM -
BUILD LOG: First steel diy CNC router build
By ivars211 in forum DIY Router Build LogsReplies: 59Last Post: 28-07-2014, 08:29 PM -
Need help, buy or build to cut steel, stainless steel, titanium etc
By fatguyslim in forum Machine DiscussionReplies: 41Last Post: 08-02-2014, 11:37 PM -
A Sturdy Steel Framed Machine Design
By Boyan Silyavski in forum Machine Frames & BedsReplies: 0Last Post: 06-11-2013, 05:58 PM -
BUILD LOG: 7' X 4' Steel frame build
By Ricardoco in forum DIY Router Build LogsReplies: 6Last Post: 28-10-2012, 06:02 PM
Bookmarks