Threaded View
-
22-08-2013 #8
Will PM you about this has it's easy misunderstood and don't want others reading and not understanding properly so getting into trouble blowing stuff up and electrocuting them selfs.!!!!!
No 1610 for Long X Axis and Gantry Y Axis (moves Z).
Then 1605 for Z axis (UP/DOWN)
Don't go less than 18 teeth and I always use 20 teeth has the belt engages pulley better giving better wear.
Don't use less than 15mm wide belts and I find 15mm is perfect size. 20 or 25mm is overkill and wasted money.
HTD is the preferred belt type for it's profile but don't think it would make a big difference here anyway has the belts are only short and not under much stress or heavy loads.
Yes 5mm pitch.
-
The Following User Says Thank You to JAZZCNC For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Steel frame cnc router design/build
By CraftyGeek in forum DIY Router Build LogsReplies: 110Last Post: 06-05-2015, 10:00 PM -
BUILD LOG: First steel diy CNC router build
By ivars211 in forum DIY Router Build LogsReplies: 59Last Post: 28-07-2014, 08:29 PM -
Need help, buy or build to cut steel, stainless steel, titanium etc
By fatguyslim in forum Machine DiscussionReplies: 41Last Post: 08-02-2014, 11:37 PM -
A Sturdy Steel Framed Machine Design
By Boyan Silyavski in forum Machine Frames & BedsReplies: 0Last Post: 06-11-2013, 05:58 PM -
BUILD LOG: 7' X 4' Steel frame build
By Ricardoco in forum DIY Router Build LogsReplies: 6Last Post: 28-10-2012, 06:02 PM
Bookmarks