. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 24-08-2013 #11
    Boyan Silyavski's Avatar
    Lives in Denia, Spain.
    Boyan Silyavski
    Last Activity: 15-04-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,049. Received thanks 333 times, giving thanks to others 55 times. Made a monetary donation to the upkeep of the community.
    Hi,

    as i mentioned before but maybe you missed it, this machine exclusively will be used for 3D jobs most of them in the 140mm-170mm height region. Not for lettering, woodworking or similar.

    The guy is doing model yacht building. So shapes would be very strange
    So the Z that enters the zone below the gantry should be thin, as not to touch the other parts of the model while the bit is routing deep below hollowing something.

    Check my picture and will see for yourself what i mean. Its a specific 3D job machine. I don't believe that reinforced 20mm steel plate for the spindle with 10mm ribs is flimsy as you suggest.

    If you have any other ideas i am open to suggestions. Point me to a better solution and i will change the design.

    Click image for larger version.  Name: z axis.jpg  Views: 1265  Size: 69.4 KB  ID: 9759
    Last edited by Boyan Silyavski; 24-08-2013 at 01:39 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: Steel frame cnc router design/build
    By CraftyGeek in forum DIY Router Build Logs
    Replies: 110
    Last Post: 06-05-2015, 10:00 PM
  2. BUILD LOG: First steel diy CNC router build
    By ivars211 in forum DIY Router Build Logs
    Replies: 59
    Last Post: 28-07-2014, 08:29 PM
  3. Need help, buy or build to cut steel, stainless steel, titanium etc
    By fatguyslim in forum Machine Discussion
    Replies: 41
    Last Post: 08-02-2014, 11:37 PM
  4. A Sturdy Steel Framed Machine Design
    By Boyan Silyavski in forum Machine Frames & Beds
    Replies: 0
    Last Post: 06-11-2013, 05:58 PM
  5. BUILD LOG: 7' X 4' Steel frame build
    By Ricardoco in forum DIY Router Build Logs
    Replies: 6
    Last Post: 28-10-2012, 06:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules