. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 14-10-2013 #11
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by silyavski View Post
    8 microsteping was what i had in mind. I have tested the PC upto 100Mhz as far as i remeber and it was Ok. With other BOB, but i assume will run with this also.
    Don't run that high thou otherwise high chance of troubles. Only set the Kernal speed high has needed and no more. 25Khz is the best and every increase above increases chances of trouble. Wouldn't go above 60khz no matter what driver test says or PC thinks it can do.!!
    If you need that high pulse rate then buy motion control card, in fact I'd buy one anyway if you want the best performance from machine.!
    Last edited by JAZZCNC; 14-10-2013 at 11:24 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: Steel frame cnc router design/build
    By CraftyGeek in forum DIY Router Build Logs
    Replies: 110
    Last Post: 06-05-2015, 10:00 PM
  2. BUILD LOG: First steel diy CNC router build
    By ivars211 in forum DIY Router Build Logs
    Replies: 59
    Last Post: 28-07-2014, 08:29 PM
  3. Need help, buy or build to cut steel, stainless steel, titanium etc
    By fatguyslim in forum Machine Discussion
    Replies: 41
    Last Post: 08-02-2014, 11:37 PM
  4. A Sturdy Steel Framed Machine Design
    By Boyan Silyavski in forum Machine Frames & Beds
    Replies: 0
    Last Post: 06-11-2013, 05:58 PM
  5. BUILD LOG: 7' X 4' Steel frame build
    By Ricardoco in forum DIY Router Build Logs
    Replies: 6
    Last Post: 28-10-2012, 06:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules