-
-
06-01-2016 #152
Good call on the '40 posts' Clive. Yeah, I've been lurking a bit... I'm around one of the weekends in Feb (8th?) I'll give you a shout and maybe drop in for a cuppa!
Wal.
-
08-02-2016 #153
Hi,
I'm new to the forum but want to build something similar to this (very similar) I have read the thread a few times and am in the process of re-drawing the design in NX as I am not familiar enough with Sketchup to be confident releasing parts from it for manufacture. Also I think if I redraw it I will have a better idea of exactly how it all works and whether it will still be suitable for my requirements.
Could you please provide exact part numbers for the ball screws and linear rails you have used in this design. I have got the Hiwin catalogues but am unsure of the exact components that have been used. Once I know exactly what is used I can then start modelling these also.
Really enjoy reading the thread and have learned a lot already.
Thanks in advance for any help you can be.
Thanks,
Sy
-
-
08-02-2016 #155
Last edited by JoeHarris; 08-02-2016 at 04:13 PM.
-
08-02-2016 #156
The main difference is that i would have done all from aluminum plate, cause i spend too much time cleaning, , aligning, welding, painting, etc. When you draw the line is not that much cheaper and aluminum is more beautiful to look at.
Speaking especially about a machine made for sale , not for one for my self.
-
28-07-2016 #157
Querido Silyavski, have you some detailed info, or some thread that point me to the right way about how to level with epoxy top and bottom of Y Gantry? i think that wil be a little hard to get it perfectly leveled :/
-
28-07-2016 #158
-
28-07-2016 #159
impossible to get that brand in Argentina :/ btw, reading your posts now, thanks for the link!
looks like some of your pics dont work anymore :( http://www.mycncuk.com/threads/6619-...7113#post67113Last edited by samsagaz; 28-07-2016 at 11:24 PM.
-
28-07-2016 #160
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Steel frame cnc router design/build
By CraftyGeek in forum DIY Router Build LogsReplies: 110Last Post: 06-05-2015, 10:00 PM -
BUILD LOG: First steel diy CNC router build
By ivars211 in forum DIY Router Build LogsReplies: 59Last Post: 28-07-2014, 08:29 PM -
Need help, buy or build to cut steel, stainless steel, titanium etc
By fatguyslim in forum Machine DiscussionReplies: 41Last Post: 08-02-2014, 11:37 PM -
A Sturdy Steel Framed Machine Design
By Boyan Silyavski in forum Machine Frames & BedsReplies: 0Last Post: 06-11-2013, 05:58 PM -
BUILD LOG: 7' X 4' Steel frame build
By Ricardoco in forum DIY Router Build LogsReplies: 6Last Post: 28-10-2012, 06:02 PM
Bookmarks