Threaded View
-
16-09-2013 #8
Been busy with other things recently and finally decided to have another crack on the design.
The work area has increased a bit and gone a bit beefier.
The work area is now 890x1000
The cutting area should be about 670x780 now.
Main frame is now 50x50x3 box. The rails bolt on to 60x60x5 (blue)
The green bits are 30x30x2 box to support the baseplate.
The gantry is still 120x120x5 ali box.
So any feedback is greatly appreciated before I start cutting the steel :)
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
BUILD LOG: Steel frame cnc router design/build
By CraftyGeek in forum DIY Router Build LogsReplies: 110Last Post: 06-05-2015, 10:00 PM -
Design Help Pt2 Required for CNC design/Build
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 38Last Post: 21-07-2014, 02:05 PM -
Need help, buy or build to cut steel, stainless steel, titanium etc
By fatguyslim in forum Machine DiscussionReplies: 41Last Post: 08-02-2014, 11:37 PM -
BUILD LOG: Vertical fixed gantry. Design & build. (Steel/epoxy)
By Greeny in forum DIY Router Build LogsReplies: 8Last Post: 19-08-2013, 08:26 PM -
Design help etc required with DIY CNC Router Design / Build
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 21-10-2011, 04:50 PM
Bookmarks