Steel/Aluminium design/build, sorta smallish, cuts ali hopefully

[mart154]

Been busy with other things recently and finally decided to have another crack on the design.

The work area has increased a bit and gone a bit beefier.

The work area is now 890x1000
The cutting area should be about 670x780 now.

Main frame is now 50x50x3 box. The rails bolt on to 60x60x5 (blue)
The green bits are 30x30x2 box to support the baseplate.
The gantry is still 120x120x5 ali box.

So any feedback is greatly appreciated before I start cutting the steel :)