A sufficiently strong machine

[Clive S]

What an epic build well done ..Clive

[JAZZCNC]

Congratulations that's a fantastic machine you've built there Jonathan. . . . . . been waiting long time to see it but worth the wait. .

[GTJim]

Jonathan, great build log and very well thought out.
Jim

[kingcreaky]

I cant add anything more than what Jazz and Jim have already said, apart from as ive said to you before... you one day are going to be a very successful man. And once again, I take my hat off to you sir.

[Greeny]

Great Machine
Thanks for posting all the photos and info.
Very interesting and educational.
Great job.

[Boyan Silyavski]

Great machine and very informational build. I will implement some of your ideas on my next build, especially the system for oiling the bearings.

I am slightly curious about the ceramic bearing spindle. From my understanding, if you / god helps no to happen/ hit the spindle by accident on the table or a part, what would happen to the ceramic balls? You say there is an electric contact. Maybe only the lower pair is ceramic?

From where did you get that encoder for the spindle? Does your VFD support encoders?

[AdCNC]

What an epic build well done ..Clive

Speaking of epic build, hows your build coming along? :-)

[Clive S]

Well thanks to your work on the machining for the gantry its now just about alive with all axis running. Watch this space and I will try and get a build log up soon. Working on the control box now.
Thanks again for the great machining work you did for me. ..Clive

[AdCNC]

Well thanks to your work on the machining for the gantry its now just about alive with all axis running. Watch this space and I will try and get a build log up soon. Working on the control box now.
Thanks again for the great machining work you did for me. ..Clive

Any time Clive look forward to seeing it in all it's glory