Hybrid View
-
03-09-2013 #1
Last Activity: 17-06-2020
Thanks John. Any specifics on what the max error can be? +/-0.5mm or less? not sure what to ask for on the drawings.
Regards,
T.
-
03-09-2013 #2
Last Activity: 13-05-2015
Can't give any specific numbers but I DO know that a 1" (25.4mm) taperlock bush will fit comfortably on a 25mm shaft and still have remaining adjustment. Best practice is obviously to use the closest fitting you can, even if that means selecting an imperial bored bush.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Taperlock and translock bushes
By davethefixer in forum Linear & Rotary MotionReplies: 2Last Post: 22-03-2013, 12:12 PM -
6mm shaft to 6.35mm hole?
By JuKu in forum Metalwork DiscussionReplies: 3Last Post: 15-12-2012, 02:29 PM -
Stepper shaft couplings - can you ID these?
By HankMcSpank in forum Stepper & Servo MotorsReplies: 17Last Post: 15-04-2012, 03:46 PM -
Simple Solution- Drive 1" Ball Screw Shaft with NEMA-23-Size Stepper Motor Shaft
By LoveLearn in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 08-02-2012, 01:52 AM -
Need to drill a spanner shaft
By GeorgeD in forum Metalwork DiscussionReplies: 4Last Post: 31-07-2010, 10:38 PM
Bookmarks