Thread: Warco Major CNC build log
Hybrid View
-
22-06-2009 #1
Robin,
Been watching this with interest as I want to do the same to mine going forward, although not sure my engineering skills are up to the challenge yet.
I am still struggling to understand how the Z-mechanism will work. Does the 'honking plate' clamp to the quill flange under the head and, if so, where does the remainder bolt to on the head itself. What is the advantage of that over motorising the quill handle itself?
On the X-axis, I can understand why the motorised element sticks out so far to allow more X travel, but again, how is that better than driving the handwheel end? And could it be done without it sticking out so far as this would give me space problems?
I know Kip has done something similar.
I've yet to strip it down and draw it all up to work out how to do it, but just starting to do some planning for later on this year.
-
22-06-2009 #2
Hi Irving
Let's not forget that trying to screw this kind of accuracy out of a Warco mill/drill puts us deep in to the realm of silk purse and sow's ear. Silly has already been left way behind
Motorizing the Z axis handle would be much more in keeping with the machine, but you would never push the boundaries that way.
Would you like to have the z-axis I'm ripping out? It's much the same as the one that's going in but a lot less beefy and made without the benefit of cnc.
One more set of pics and the operation should become clear.
Robin
-
22-06-2009 #3
Robin,
I'd be happy to get a reasonable degree of accuracy, not interested at pusing the boundaries at first. Cost is still an issue, but if i am going to invest a few £100 in ballscrews etc. I need to be comfortable I know what I am doing and I have a reasonable chance of success.
I may well be interested in your old Z-axis... its still likely to be an order of magnitude better than anything I can produce (yet).
-
23-06-2009 #4
I'm doing it the same way I did last time, the screw housing bolts to the honking plate. Only difference is I'm using 2 screws this time instead of one. I think it needs a bit extra to lock the screw parallel to the quill.
Not exactly pretty but you can have the X and Y screws if it helps They are cluttering up the workshop, probably going in the bin next time I tidy the shelves. If I find a box I could send the whole she-bang standard parcels.
I bought zero backlash nuts from Marchant Dice for the X and Y, odd things that you had to crush sideways to set. I never got the backlash below 3 thou. Also I didn't get the ends machined, just glued on extension sleeves with Loctite. With the benefit of hindsight, a false economy.
The Z axis was a disappointment, nice screw off ebay but I didn't eliminate flex and it always fell slightly short of the mark. I'm hoping the honking plate will fix that.
Robin
-
23-06-2009 #5
-
24-06-2009 #6
-
25-06-2009 #7
Peg in slot, slack enough to convince me that I can't hang a spindle motor off the side.
Only got an hour on it last night, wife dragged me down the pub, forced me to drink beer then drove me home. I was in no condition to continue.
I did cut the extra relief in the cheeks so the motor plate can slide home then bored and faced a 40t XL pulley to fit the ball screw shaft.
Took the camera but forgot to put the memory card in it so no pic.
Robin
-
25-06-2009 #8
Me again
Put the pulleys on, belt was too short.
Checked all the measurements, I don't usually get a belt wrong.
Eventually found I'd mounted a 44t pulley where a 40t was required
RS seem to be taking orders at 7pm for next day. Wonder if I'll have it tomorrow. Perhaps it will it be a 44t pulley in a 40t bag, don't remember buying a 44t, fairly sure it said 40t on the bag :naughty:
Robin
-
26-06-2009 #9
-
26-06-2009 #10
Strangely true, when I looked in the box I found an empty 44t packet and a brand spaking new 40t. Nice to have a spare I suppose
I don't think it can twist without bending the screw, I didn't stint on the metal :nope:
I now have the 40t pulley and belt in place with a faux honking plate fudged out of a bit of 2" x 3/4" iron.
It feels good, any shift on the motor moves the handle, moving the handle spins the motor. I would have wired it up but when I looked for a bit of chocolate block connector all I could find was 80A
Time for some G-code to make the real honking plate
Robin
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Haighton Major
By BillTodd in forum Milling Machines, Builds & ConversionsReplies: 25Last Post: 14-05-2022, 02:17 PM -
WANTED: Conect Minor or Major CNC Milling Machine Wanted
By stevy123 in forum Items WantedReplies: 0Last Post: 24-08-2011, 10:35 AM -
CONVERSION: Buget Warco Major 5 axis conversion
By Tweaky in forum Conversion Build LogsReplies: 45Last Post: 07-10-2010, 04:26 PM -
Warco Super Major Mill 3 month old
By grimreaper in forum Milling Machines, Builds & ConversionsReplies: 6Last Post: 18-07-2010, 02:50 PM -
NEW MEMBER: Warco super major mill
By ste64 in forum New Member IntroductionsReplies: 5Last Post: 26-05-2010, 04:27 PM
Bookmarks