Hi. Jazzcnc.
Thanks for your reply.Sorry taking so long been a bit ill.
Anyway the equipment I'm using is...Desktop pc, Longs stepper motor nema23 6 wires Model 23HS8610 1A (u) 1.8 deg/step. The motors are coupled to TR12 x 3D Trapezoidal Acme Ball screw which are run from a TB6560AHQ board.
I have it wired up with RED A+ BLUE A- GREEN B+ BLACK B-. I have added snapshots of my setup screens snapshots of my setup,hope this helps.Click image for larger version.  Name: 2013-09-12 16_53_03-Mach3 CNC Controller.png  Views: 1016  Size: 291.2 KB  ID: 10071Click image for larger version.  Name: 2013-09-12 16_54_27-Engine Configuration... Ports & Pins.png  Views: 969  Size: 22.7 KB  ID: 10072Click image for larger version.  Name: 2013-09-12 16_55_13-Mach3 CNC Controller.png  Views: 1292  Size: 20.6 KB  ID: 10073Click image for larger version.  Name: 2013-09-12 16_55_53-Mach3 CNC Controller.png  Views: 1389  Size: 24.9 KB  ID: 10074Click image for larger version.  Name: 2013-09-12 16_56_31-Mach3 CNC Controller.png  Views: 994  Size: 24.5 KB  ID: 10075Click image for larger version.  Name: 2013-09-12 16_57_08-.png  Views: 1075  Size: 133.5 KB  ID: 10076