Hi JAZZCNC

I don't have any switches connected yet, but I did use 2 wires connected to the 5 pin to auto set positions wires were apart when auto set pressed and they were all assigned to pin 10.Was this OK?

I have turned off the 3 inputs and the lights are out now.

The M1,M2,M3 home leds don't do anything even with the inputs disabled.

Here are the screen shots of what i have now.
Cheers.Click image for larger version.  Name: 2013-09-12 19_13_52-6 Limit Switches+Wire+Terminals+HeatShrink free post _ eBay.png  Views: 945  Size: 107.4 KB  ID: 10079Click image for larger version.  Name: 2013-09-12 19_30_10-Mach3 CNC Controller.png  Views: 1308  Size: 129.4 KB  ID: 10080Click image for larger version.  Name: 2013-09-12 19_30_49-Mach3 CNC Controller.png  Views: 983  Size: 18.9 KB  ID: 10081Click image for larger version.  Name: 2013-09-12 19_31_15-Engine Configuration... Ports & Pins.png  Views: 926  Size: 19.4 KB  ID: 10082Click image for larger version.  Name: 2013-09-12 19_32_00-Engine Configuration... Ports & Pins.png  Views: 945  Size: 20.0 KB  ID: 10083Click image for larger version.  Name: 2013-09-12 19_32_33-Motor Home_SoftLimits.png  Views: 988  Size: 14.6 KB  ID: 10084