Threaded View
-
06-09-2013 #10
Give another point to ESS,
They really do help if their are issues and once fully set up it runs a dream. When tuning my motors I can get a solid .005 to .01 mm repeats (the DTI and Plunge gauge are calibrated to +/- .01) which literally puts the machine up against the ability for me to accurately measure. That is with C7 screws Zap NEMA23 "24" 3.1 NM motors. Running Mach 3. B.O.B is a PMDX-126 and the power supply is a home built toroidal transformer providing ~68V w/ 15A. It does the job. Have the spindle on the relay on board the PMDX and also a secondary relay off the PMDX so that power is cut during E-Stop.
With Geckos and the Jumbo mode on a PMDX 126 or the ribbon cables you can set up a rather power system if you have the time effort and funds.
-MichaelSoftware SolidWorks 2024, Onshape, Aspire v9.5, Blender
CNC Machine: http://www.mycncuk.com/threads/3661-...Second-machine
3D printers both FDM/FFD and MSLA resin
CSWA &CSWA-AM certified
www.marino-customs.com
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
USB TO Parallel Port DIY Interface
By Lee Roberts in forum Electronic Project BuildingReplies: 42Last Post: 17-02-2018, 07:46 PM -
What is the function of a parallel port breakout board?
By hbx in forum Machine Control SoftwareReplies: 13Last Post: 12-03-2013, 06:18 PM -
parallel port address
By Dan Brown in forum Artsoft Mach (3 & 4)Replies: 6Last Post: 07-01-2010, 12:04 PM -
Laptop, ie no parallel port?
By tompsky in forum Laptops & TabletsReplies: 3Last Post: 11-11-2008, 07:12 PM -
Which USB parallel port emulator is the best
By bruce_miranda in forum General ElectronicsReplies: 1Last Post: 18-09-2008, 03:38 PM
Bookmarks