800w spindle - noise & controlling remotely

**HankMcSpank** · 08-09-2013

Originally Posted by Jonathan

Hmm, that's annoying as I just deleted the original so it'll have to stay like that. In the rest of the video I put the radio on again to demonstrate how you can't hear it with the old spindle running and also commented that it's all a bit insignificant compared to the noise generated when cutting unless perhaps what you're cutting uses very small/light cuts.

No worries you went above & beyond the call of duty - pont taken about the noise of the actual cutting itself, but for me it's mainly gonna be just 0.1mm deep into FR4! (so the noise of the spindle is likely to be the main contributing factor wrt strained man/wife relationships!)

**HankMcSpank** · 09-10-2013

So, something arrived in the post today, from Italy ...

...yay!

About £120 delivered (thanks for the heads up silyavski).

Sure, I can buy cheaper if I go the Chinese path, but I've had some horrific experiences with chinese electronics over the past couple of years (TB6560 anyone?), so I decided to pony up the extra forty quid which will hopefully save me some grief!