-
06-09-2013 #1
Last Activity: 09-02-2025
I have blender. never used it. I have the script than is supposed to go in the "python console". tried it dozens of times, cant get it to work and I don't know what I am doing At All in that software.
There must be an easier way to convert this. Maybe not free.
Anyone know of maybe a 15 day evaluation software that allows the export of the mesh file please ??Swedish Storbro Luna - 3 axis CNC mIll - 250 - 2500rpm / 1.1 tonne
3 axis CNC/router / Alu profile frame....25mm Alu Cutting bed X=500mm Y=300mm Z=110mm.....Supported 25mm X rails ....Supported 20mm Y rails....Supported 20mm Z rails.....2.2kw Chinese WC spindle..... CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller....M542 Drivers..SY60STH86-3008BF Motors...running....Mach3 / Cambam / Emachineshop.
-
07-09-2013 #2
Last Activity: 27-12-2024
Have you tried using Rhinoceros?
I know JazzCNC (Dean) uses it, and I am sure he will post in due time."If first you don't succeed, redefine success"
-
The Following User Says Thank You to Mad Professor For This Useful Post:
-
07-09-2013 #3
Last Activity: 02-10-2024
-
The Following User Says Thank You to EddyCurrent For This Useful Post:
-
07-09-2013 #4
Last Activity: 19-01-2024
Yes rhinoceros will do this and they used to give free unlimited functions demo limited to 28 saves no time restriction.
-
The Following User Says Thank You to JAZZCNC For This Useful Post:
-
07-09-2013 #5
Last Activity: 09-02-2025
I have searched google but have not come up with a solution for this small issue.
I ran the digitizing wizard in Mach3 twice. The txt file is completely empty after both attempts. The properties show 0 bytes on the file.Swedish Storbro Luna - 3 axis CNC mIll - 250 - 2500rpm / 1.1 tonne
3 axis CNC/router / Alu profile frame....25mm Alu Cutting bed X=500mm Y=300mm Z=110mm.....Supported 25mm X rails ....Supported 20mm Y rails....Supported 20mm Z rails.....2.2kw Chinese WC spindle..... CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller....M542 Drivers..SY60STH86-3008BF Motors...running....Mach3 / Cambam / Emachineshop.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Mach3 digitizing wizard not saving file
By dudz in forum Probing, Digitizing & ScaningReplies: 0Last Post: 08-09-2013, 09:48 PM -
Digitizing probes practicality
By dudz in forum Probing, Digitizing & ScaningReplies: 2Last Post: 04-06-2013, 03:31 PM -
Mesh cam or other?
By totts in forum CAD & CAM SoftwareReplies: 0Last Post: 26-08-2011, 04:57 PM -
Probing / Digitizing - What the best way to do this job?
By Mad Professor in forum Probing, Digitizing & ScaningReplies: 2Last Post: 08-05-2011, 12:32 PM -
Digitizing
By Mad Professor in forum Probing, Digitizing & ScaningReplies: 2Last Post: 06-01-2011, 06:52 PM
Bookmarks