Ready Steady Eddy

[EddyCurrent]

I think the meniscus extends about 5mm across the width so with that each side it leaves a 30mm flat section in the middle, as you say that will be plenty for rail mounting. A file will soon sort out the meniscus removal later.

I forgot to mention that I had an epoxyduct at each end, plus, and it might be going extreme, I gave the epoxyduct pieces of wood a coating of sanding sealer thinking that the bare wood might soak up some of the epoxy, unlikely though it might be.



Also in the excitement I forgot to put Vaseline on the sides of the draught excluder but not to worry it just means a bit of sandpapering later.