. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 26-03-2014 #1
    EddyCurrent's Avatar
    Lives in UK, United Kingdom.
    EddyCurrent
    Last Activity: 29-06-2025 Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,203. Received thanks 278 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    Gave me time to get the fans fitted anyway, something I was not looking forward to but not as bad as I thought. I'll probably fit a thermostat with a remote sensor in the hood.
    Two fans mainly because I already had them but they are 110 Volt so just wired them in series. Made a box with a sliding lid to allow easy replacement of filter medium, the fans are blowing into the panel pulling air through the filter medium. A vent at the top allows heat to escape by convection or forced by the fans, it does not allow crap to enter under gravity.
    The wiring will have to be kept to the back of the panel as much as possible so as not to interfere with air flow.

    (just ignore the temporary lashed in wiring)

    Click image for larger version.  Name: fan1.jpg  Views: 737  Size: 90.1 KB  ID: 11917Click image for larger version.  Name: fan2.jpg  Views: 815  Size: 150.7 KB  ID: 11918Click image for larger version.  Name: fan3.jpg  Views: 858  Size: 128.2 KB  ID: 11919
    Last edited by EddyCurrent; 26-03-2014 at 12:16 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. traveling steady, turning 1/2 bar down over 10".
    By graffian in forum Metalwork Discussion
    Replies: 3
    Last Post: 08-05-2013, 07:59 PM
  2. NEW MEMBER: Hello all, finally ready to start a build log.
    By Iwant1 in forum New Member Introductions
    Replies: 11
    Last Post: 25-12-2012, 06:03 PM
  3. eBay: Boxford 125 TCL Mach3 Ready
    By rnr107 in forum Items On eBay UK
    Replies: 1
    Last Post: 25-07-2012, 07:29 AM
  4. Anyone have experience of ready made machines
    By bogstandard in forum Milling Machines, Builds & Conversions
    Replies: 9
    Last Post: 07-04-2010, 07:44 PM
  5. Windows 7 RTM Confirmed & Ready !
    By Lee Roberts in forum Computer Software
    Replies: 8
    Last Post: 29-07-2009, 03:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules