. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 30-06-2014 #1
    EddyCurrent's Avatar
    Lives in UK, United Kingdom.
    EddyCurrent
    Last Activity: 2 Weeks Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,216. Received thanks 280 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    Quote Originally Posted by silyavski View Post
    Is that still valid? I am right there and having very similar ideas
    If the gantry racks then it is that small a movement I don't care. I disconnected one side and tried to push it, I could feel no movement but I did not use a dial indicator.
    The AM882's have tripped on stall but only when I've tried to get too much speed/acceleration from the machine, when tuned to sensible values they do not trip.
    I don't know if they tripped due to racking or something else.
    I am still using only one homing switch on the X axis and that is working fine for me, your machine (silyavski) will be stiffer then mine I imagine so it should work for you too.
    If anyone has doubts they should probably use one motor and connect the two ball screws with belts.
    Last edited by EddyCurrent; 30-06-2014 at 12:34 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 22 users browsing this thread. (0 members and 22 guests)

Similar Threads

  1. traveling steady, turning 1/2 bar down over 10".
    By graffian in forum Metalwork Discussion
    Replies: 3
    Last Post: 08-05-2013, 07:59 PM
  2. NEW MEMBER: Hello all, finally ready to start a build log.
    By Iwant1 in forum New Member Introductions
    Replies: 11
    Last Post: 25-12-2012, 06:03 PM
  3. eBay: Boxford 125 TCL Mach3 Ready
    By rnr107 in forum Items On eBay UK
    Replies: 1
    Last Post: 25-07-2012, 07:29 AM
  4. Anyone have experience of ready made machines
    By bogstandard in forum Milling Machines, Builds & Conversions
    Replies: 9
    Last Post: 07-04-2010, 07:44 PM
  5. Windows 7 RTM Confirmed & Ready !
    By Lee Roberts in forum Computer Software
    Replies: 8
    Last Post: 29-07-2009, 03:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules