Looking for advice on budget machine for watchmaking

[JAZZCNC]

What sort of size were you thinking of.

Will only be small 600x300 cutting area for a first attempt. Will sell it on then when it's proven it's self and build a larger version.
Don't really see any problems with building in sections anyway if done correctly and actually will allow some adjustment if not quite 100%. Single cast piece would be quite difficult to tweak any slight errors out and will be bit unwieldy for moving etc. Personally Don't think the slight extra strength it will add will be worth the trouble in long run.? . . . Time will tell and that's what first one will determine.!

Yes I did think about some form of Cooling and maybe surround mould with skin and fill with bags of ICE.!! . . . . I'll try and keep it simple first thou because by time I'm ready it will be bloody freezing in workshop so don't get much simpler. . Lol