-
24-09-2013 #1
hi guys can anybody help with a system 48 plus that doesn't cut the right size.
I have measured using absolute on the machine and in the X the control says 100.48 but when i measure the distance its only 97.02mm
In the Y its says 101.09 but measures 97.2
Does anybody out there know a way of calibrating it
thanks inadvance
-
17-09-2014 #2
Hi just realised how long ago you raised this question.
Hope you solved this calibration issue.
I calibrated mine through MACH 3
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Gerber System 48 with Mach 3 software training required!
By Ahmed in forum Opportunities Available & SoughtReplies: 0Last Post: 07-11-2013, 08:56 PM -
Gerber system 48
By martin54 in forum Milling Machines, Builds & ConversionsReplies: 67Last Post: 13-09-2013, 12:35 PM -
BUILD LOG: Gerber system 48 conversion
By martin54 in forum DIY Router Build LogsReplies: 14Last Post: 25-08-2013, 11:29 AM -
Gerber system 48 Plus router
By poppa jock in forum Machine DiscussionReplies: 0Last Post: 29-07-2013, 05:43 PM -
Contactor sizing?
By Swarfing in forum General ElectronicsReplies: 5Last Post: 27-12-2010, 08:58 PM
Bookmarks