DesignCAD 3D MAX v.21 review

[cropwell]

All I was trying to do was get some idea what DesignCad and ContourCam would do.

A 3D CAD/CAM for £130 quid seemed worth a punt. It will probably do all I want, but I want to check it out, but I can NOT port it across to my machine because of measures put in for piracy protection. Fair enough for AutoCAD or SolidWorks or something costing gazillions that your company has paid through the nose for, but I don't want that. I haven't got enough interest in life left to invest in learning something complicated. I want quick and dirty solutions, but cheaply !

I also want Software on a CD, not a download that disappears when the hard drive fails, with a manual I can take with me on a plane, train or toilet. I like books I can flick through, make pencil notes in, put placemarks in, not pdf-s on the same machine that I am using to cut a Perspex cock and balls.

Good Grief

Rob-T

[John S]

Rob,
Just in case Mr magic can't open your dxf file in his single license program here's a video.

[EddyCurrent]

You must have a couple of Prince Albert's in there

[cropwell]

The knob end is the same size as a £1 coin. If you cut it out of 3mm ali it should work as a shopping trolley key. The rear 'Albert' puts it on your key ring

[Swarfing]

Rob

If you were taking offense from my reply please don't, it was not aimed at you at all. i do feel for you though and understand the issues your facing.

[cropwell]

I cant see anything you've said that might case offence