Thanks!
I discarded the Chinese servos due to some worry that will be difficult to tune. Decided on Mitsubishi servos with very good specs, from fleabay. But could not find a good looking ones, or were expensive/ yeah, sellers know/, or were incompatible with mach3 /again sellers know and try to fry you/ .

Yesterday i payed for 4x SAMSUNG SERVO MOTOR DRIVER CSDJ-04BX2 and CSMT-04BB1ANT3 motor 400W. Absolute encoders 2500, auto tuning, max 450khz pps, in and out encoder signals, and so on.


Here is the manual:http://www.cnczone.ru/forums/index.p...e=post&id=8233 section6.1 and on

my head hurts from reading 10 different servo manuals :-)