Quote Originally Posted by silyavski View Post
So basically i will not use DTI until the moment i have the machine running. from experience it seems i can notice with naked eyes 0.05mm gaps without problem against the straight edge/ the epoxy story/ so i am happy that everything is tight fit.
Now now Boyan.!!! . . You contradict your self about lieing to one's self here with this statement.!! . . . . Your fooling your self if you think you can see "Five one hundreth's Gaps" with naked eye over the length or width of this machine.

Not saying your machine isn't or won't be accurate because I know it will or you will make it so. But I must say think your going to be surprised when time comes to cutting just how far out of Tram that spindle will be if you don't put a DTI on it. I also think it will be Bitch to setup looking at the pics.!!