Quite an Unusual one

[Boyan Silyavski]

where did you find that ball screw picture?

Olive green is a good idea. Some pieces black or and dark grey. I tried with the other green Mid Brunswick Green, but did not like it
Unfortunately someone took the name big berta . But lets make it alive, then the name.

Today started soldering the bed frame and bought the epoxy. As i stopped working at all except on the machine, money flows like water through my fingers. So i bought at the end the Spanish epoxy with very similar properties like the WS. from choice of three i choose the most similar. There were seemingly better though some data was not clear, from the one that could concern, i mean. 125eur with shipping for 5kg pack +1.6kg hardener.

Basically 90 min gel time, max isotherm 40C, compression strength 580kg/cm2, yellowish, contraction 0.1%, density 1.08 gr/cm3 which roughly translates to 6.5l so ~20eur /lit mix, I cross my fingers that it works ok.




It seems that the machine will lay on the floor with no legs. have to figure where to fix some hooks for the future and most importantly some plates to lift it using car jack. To level it for the epoxy pouring. Cause now it is unliftable already.