Build and Intro

[swisscheese]

Hi all, some help with respect to a motor drive would be really good.

It's a 2m982 driver.

Anyway me being stupid some motor wires got crossed and there was a spark and now it doesn't work is the short of it. I looked a bit on the net and it says it has voltage and amp protection. I opened it up and no current flowed over the 10a 250v fuse. I then got some new fuses, however the ones I brought are an enlarged version, they also don't have the wire coming out the ends. I put this in. I then powered it up and what happens is the PSU powers it for a fraction of a second then the psu shuts off then the red led on PSU dims. I also soldiered a piece of wire where the fuse would be, exactly the same things happens as above. The PSU works fine on the other two drivers.

Any help would be greatly appreciated. Don't want to have to wait two weeks for new driver :(

Here's some pics