. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-10-2013 #9
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by HankMcSpank View Post
    I've seen reference on the net to 'U' 'V' & 'W' for the spindle pins...are these just arbitary abbreviations give to the three phases?
    Those are the correct abbreviations for each phase. The forth wire won't be connected to anything.
    Just wire to 3 connectors and if runs in reverse swap any 2 wires. . . Thats it.!!
    Last edited by JAZZCNC; 02-10-2013 at 08:01 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Drawing of water cooled spindle
    By GTJim in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 11-02-2014, 04:21 PM
  2. Cooling a water cooled spindle, without pipes everywhere & huge water tanks/buckets!
    By HankMcSpank in forum Generic Chinese Spindles
    Replies: 17
    Last Post: 18-09-2013, 06:32 AM
  3. Chinese 2.2 water cooled spindle / Which VFD ?
    By dudz in forum Motor Drivers & Controllers
    Replies: 20
    Last Post: 16-08-2013, 02:22 PM
  4. water cooled spindle
    By alex wight in forum Generic Chinese Spindles
    Replies: 1
    Last Post: 21-09-2012, 09:57 PM
  5. water cooled spindle opinions
    By phill05 in forum Generic Chinese Spindles
    Replies: 7
    Last Post: 23-02-2012, 05:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules