Circular Pocket problem?

[John S]

Got ballscrews fitted ?
Flats on circles are normally mechanical, slack in nuts etc.
You can compensate in mach under Backlash compensation but it's a cludge.
For one it doesn't work correctly and secondly if there is free play, even compensated for, the cutter can grab and pull the work.

[JAZZCNC]

slack in nuts etc.

John's the leading expert when it comes to "Slack Nuts".!!. . . . Viagra works better than backlash Comp Hey John. .

Agree with him thou 99% sure it will be Sloppy nuts or loose couplings.!!

[Ulsterman]

Check your software for overlap values or lead in lead out and also cutter comp activation points

[John S]

Yup Jazz is right, that viagria isn't all it's cracked up to be.
Gave mine to me grandad, stops him rolling out of bed at night

[Leadhead]

Ah right! - To get good circles. You need to securely tighten the main casting to Y axis ball screw journal.
My "nuts" are now secure in a steel thong, but now have the problem of walking a bit odd!
Apologies to have wasted any ones time.

[cropwell]

My father-in-law had Viagra to stop him pissing on his slippers.