Frank from manchester

[mekanik]

Thanks for the sketch Dean, if i get round to it i will be going for the same size & format so will be following the thread with interest.

[shoeswith]

Hi

I think if your building your first router buy and read published plans it will be much easier even if you dont follow them. I built my first using solsylva plans. Solsylva CNC Plans~ Home Page The second one was built from open source but the plans gave me so much step by step help I had learnt loads by then and was more than ready. I know there are many others you should look for reviews. There are many shortcuts such as buying whole pre-manufactured axis's (such as the Z axis) which to be honest really speeds things up and gives much better results but of course they all add cost. Good luck