Romi EZ-Path S Lathe crt replacement

[Nemo1966]

Second link has some instructions

BRIDGEPORT EZ-PATH LATHE EZ-TRAK MILL LCD MONITOR KIT | eBay
COLOR Monitor For Bridgeport EZ Path lathe - Replace that small monitor! | eBay


EZ-Path Lathe

Thanks for the info - but I wish it was that easy. The lathe we have does not have the connections that the ones you have listed have. The lathe we have has no connectors on the display box at all. Inside on the crt the vga cable if plugged directly into the crt board (not with a standard vga connector). I have the tech spec diagrams but these do not corrolate with the actual plug P101B.