Bridge Gantry Profile

[johnsattuk]

Could you give some details - manufacturer/supplier, cost ?

I like the look of this section

[~andy]

Take a seat.



It's a Maytec profile about ~£130 a meter.

Oh, you'll need an M14 tap on top of that cost.

[asbo]

Don't do it

I got over 10 meters of steel box section cut to length and delivered for less than that, and that could probably be had cheaper elsewhere. Probably harder to work with, but 10x cheaper

[johnsattuk]

Maybe a bit expensive but would make a nice neat job, would be good for mounting the "X" rails as well.

Have M14 taps.