Threaded View
-
11-10-2013 #1
Hi Everybody
My name is Vagelis and I am from Greece
I would like your advice and your opinion on the plans below.
Involving a cnc (1500mm x 1000mm) which
will runs with Yaskawa servo 400 watt
Supported profiled rails 20mm, ballscrews X, Y 20mm Z 16mm
Spindle 2,2 KW water cooled
The following plans have to do with the table
I want to make something stiff and adjustable
The main table is made with 80X80 5mm square tube and the X axis rails will be placed on two ( each side ) I beams. The one I beam (120mm height) will be welded on the table and the above will be adjustable up-down left-right with screws. Before i go on with the plans i think that it will be good to get some opinions from the "experts" as i am amateur at cnc constructions ( sory for my english).
My main concern is if I beam is suitable for this purpose, or it is better to go with 120X60 5mm tube
The cutting surface will also be adjustable from the brown L shape angle that can be moved up and down.
Thanks everybody for your time
Thread Information
Users Browsing this Thread
There are currently 14 users browsing this thread. (0 members and 14 guests)
Similar Threads
-
BUILD LOG: New build.Stell frame cnc 1500X1000.Ball screw and gearing calculations
By ba99297 in forum DIY Router Build LogsReplies: 12Last Post: 03-09-2013, 10:37 PM -
Adjustable spindle mount?
By cncJim in forum Marketplace DiscussionReplies: 2Last Post: 19-06-2013, 08:58 PM -
Your Opinion
By PWD in forum Milling Machines, Builds & ConversionsReplies: 4Last Post: 22-05-2012, 11:02 AM -
Opinion about the structure of the router ...
By C.AlveSilva in forum Gantry/Router Machines & BuildingReplies: 11Last Post: 01-05-2012, 02:03 PM -
WANTED: adjustable tailstock
By johngoodrich in forum Items WantedReplies: 0Last Post: 29-03-2012, 07:38 PM
Bookmarks