Threaded View
-
11-10-2013 #1
Hi Everybody
My name is Vagelis and I am from Greece
I would like your advice and your opinion on the plans below.
Involving a cnc (1500mm x 1000mm) which
will runs with Yaskawa servo 400 watt
Supported profiled rails 20mm, ballscrews X, Y 20mm Z 16mm
Spindle 2,2 KW water cooled
The following plans have to do with the table
I want to make something stiff and adjustable
The main table is made with 80X80 5mm square tube and the X axis rails will be placed on two ( each side ) I beams. The one I beam (120mm height) will be welded on the table and the above will be adjustable up-down left-right with screws. Before i go on with the plans i think that it will be good to get some opinions from the "experts" as i am amateur at cnc constructions ( sory for my english).
My main concern is if I beam is suitable for this purpose, or it is better to go with 120X60 5mm tube
The cutting surface will also be adjustable from the brown L shape angle that can be moved up and down.
Thanks everybody for your time
Thread Information
Users Browsing this Thread
There are currently 6 users browsing this thread. (0 members and 6 guests)
Similar Threads
-
BUILD LOG: New build.Stell frame cnc 1500X1000.Ball screw and gearing calculations
By ba99297 in forum DIY Router Build LogsReplies: 12Last Post: 03-09-2013, 10:37 PM -
Adjustable spindle mount?
By cncJim in forum Marketplace DiscussionReplies: 2Last Post: 19-06-2013, 08:58 PM -
Your Opinion
By PWD in forum Milling Machines, Builds & ConversionsReplies: 4Last Post: 22-05-2012, 11:02 AM -
Opinion about the structure of the router ...
By C.AlveSilva in forum Gantry/Router Machines & BuildingReplies: 11Last Post: 01-05-2012, 02:03 PM -
WANTED: adjustable tailstock
By johngoodrich in forum Items WantedReplies: 0Last Post: 29-03-2012, 07:38 PM
Bookmarks