Threaded View
-
30-10-2013 #11
After hours of design i come back with 3 final (!!!!) plans.
Plan A
( i have already post it but i repost it near the other two plans )
It is the most simple within the other two and also needs the less steel
Plan B
It is the heaviest within the other two
The difference with A is that the beams of the cutting table are lieing between the two X axis rails support beams. It also have extra 40X40 beams for reinforcing X rails beams
Plan C
This plan combines A with B. The beams of the cutting table have been welded as plan A and the reinforcing of X axis beams is as plan B
All plans are made with 80X80 box section steel. Plan B and C also have 40X40 diagonal box section between X axis rails support beams
I am waiting for your advices
Thank youLast edited by ba99297; 31-10-2013 at 12:08 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: New build.Stell frame cnc 1500X1000.Ball screw and gearing calculations
By ba99297 in forum DIY Router Build LogsReplies: 12Last Post: 03-09-2013, 10:37 PM -
Adjustable spindle mount?
By cncJim in forum Marketplace DiscussionReplies: 2Last Post: 19-06-2013, 08:58 PM -
Your Opinion
By PWD in forum Milling Machines, Builds & ConversionsReplies: 4Last Post: 22-05-2012, 11:02 AM -
Opinion about the structure of the router ...
By C.AlveSilva in forum Gantry/Router Machines & BuildingReplies: 11Last Post: 01-05-2012, 02:03 PM -
WANTED: adjustable tailstock
By johngoodrich in forum Items WantedReplies: 0Last Post: 29-03-2012, 07:38 PM
Bookmarks