Stell frame cnc 1500X1000. Adjustable table your opinion please

[ba99297]

New photos of the progress
Yesterday i cut the steel and the aluminum pieces for the bed


I install a winch at the roof , as the weight of the table is big ( nearly 140 kgr so far) to handle with my hands
I turn the table upside down to full weld all the joints


I remove the middle piece as i change my plans. Another three pieces will be welded vertical to the sides of the machine



I put temporary the steel and aluminum pieces of the bed to get an idea how the machine will looklike
Solid works is very good but the real world even better.



I will use epoxy for the rails level but i try to be as precise as possible.
I chek the level of the table and the results are very good
I use two diagonal threads that they just touching each other ( that means the orners are at the same level)
Also i use a digital level that shows RELATIVE ANGLE between the diagonals 0.0o.

If you see the videoa the absolute angle is 2.0-2.1. That is not a real mesurement as the level fall from my wifes hands and has an offset 2.0o. That is not matter as what maters is the relative angle
Here are the videos