Hi guys
Quite a long time since my last post
I am thinking about an arrangement for the gantry of my machine
Before i go on with the plans i want your advice about the basic idea
Three 120X60X3mm beams will be welder making a C shape
In front of this "C shape" a 15mm aluminium plate ( blue color) will be bolted in order to bolt on this plate the profiled rails
The plans are not accurate, so any imperfections will be corrected. I just want your opinion in order to see if this arrangement is good or bad an then go on with the way i will attach the gantry on the carriages.
The gantry will be pulled by two Yascawa servos 400 watt and a 2010 ballscrew
Thanks for you time

Vagelis
Click image for larger version.  Name: gantry1.JPG  Views: 2366  Size: 199.0 KB  ID: 11274Click image for larger version.  Name: gantry3.JPG  Views: 2396  Size: 191.1 KB  ID: 11275Click image for larger version.  Name: gantry2.JPG  Views: 2365  Size: 175.2 KB  ID: 11276Click image for larger version.  Name: table 7 with gantry .JPG  Views: 2373  Size: 186.6 KB  ID: 11277Click image for larger version.  Name: table 7 with gantry 2.JPG  Views: 2629  Size: 581.0 KB  ID: 11278